Suzuki DF40 Outboard Engine Specifications

Visit the Suzuki Outboard Parts Lookup Catalog in the PPT Online Store

 

Item Unit Data
DF40T DF50T

 

DIMENSIONS & WEIGHT

Overall length (front to back) mm (in) 756 (29.8)
Overall width (side to side) mm (in) 382 (15.0)
Overall height S mm (in) 1263 (49.7)
L mm (in) 1390 (54.7)
Weight (without engine oil) S kg (Ibs) 106 (234)
L kg (Ibs) 109 (240)
Transom height S mm (in. type) 401 (15)
L mm (in. type) 528 (20)

PERFORMANCE

Maximum output kW (PS) 29.4 (40) 36.8 (50)
Recommended operating range r/min 5200 – 5800 5900 – 6500
Idle speed r/min 850 ± 50 (in-gear: approx. 850)

POWERHEAD

Engine type 4-stroke DOHC
Number of cylinders 3
Bore mm (in) 71.0 (2.80)
Stroke mm (in) 68.6 (2.70)
Total displacement cm3 (cu in) 815 (49.7)
Compression ratio : 1 10
Spark plug NGK DCPR6E
Ignition system Full-transistorized ignition
Fuel supply system Multi-point sequential electronic fuel injection
Exhaust system Through prop exhaust
Cooling system Water cooled
Lubrication system Wet sump by trochoid pump
Starting system Electric
Throttle control Remote control

1-7 GENERAL INFORMATION

Item Unit Data
DF40T DF50T

FUEL & OIL

Fuel Suzuki highly recommends that you use alcohol-free unleaded gasoline with a minimum pump octane rating of 87 ( 2 method) or 91 (Research method). However, blends of unleaded gasoline and alcohol with equivalent octane content may be used. R + M
Engine oil API classification SE, SF, SG, SH, SJ Viscosity rating SAE 10W-40
Engine oil amounts L (US/Imp. qt) 2.2 (2.3/1.9) : Oil change only 2.4 (2.5/2.1) : Oil filter change
Gear oil SUZUKI Outboard Motor Gear Oil (SAE #90 hypoid gear oil)
Gearcase oil capacity ml (US/Imp. oz) 610 (20.6/21.5)

BRACKET

Trim angle PTT system
Number of trim position PTT system
Maximum tilt angle degree 73°

LOWER UNIT

Reversing system Gear
Transmission Forward-Neutral-Reverse
Reduction system Bevel gear
Gear ratio 11 : 25 (2.27)
Drive line impact protection Spline drive rubber hub
Propeller Blade × Diam. (in.) × Pitch (in.)
S : Aluminum propeller SS : Stainless steel propeller 3 × 11-1/2 × 9 (S900) 3 × 11-1/2 × 10 (S1000) 3 × 11-1/2 × 11 (S1100) 3 × 11-5/8 × 12 (S1200) 3 × 11-1/2 × 13 (S1301, SS1300) 3 × 11-3/8 × 14 (S1400, SS1400) 3 × 11-1/4 × 15 (S1500) 3 × 11-1/8 × 16 (S1600, SS1600) 3 × 11 × 17 (S1700)

These specifications are subject to change without notice.

 


Buy the products and parts you need...